中文版  |  English

新闻资讯

Honda's domestic sales of gasoline generation product range

There are two types of Honda petrol in the domestic market, fully imported, and joint venture production.The Honda generator is small in size, light in weight and it is simple to operate and easy to move, thus it is widely used in telecommunications, financial services, hospitals, shops and other industries.
Just like the usual diesel generator maintenance, the Honda gasoline generator needs to be operated in a right and cared-fashion, also to prevent premature wear of the various failure occurs. Also it needs to have regular and detailed system and components checks.That including adjustment and cleaning. It is advised to set-up the user-record, especially the usage time for all operations.
Due to cumulative uses, it is important to carry out maintenance. Because Honda gasoline generators are different than other domestic unit, in addition to daily cleaning is necessary after each use to work. Please follow the listed maintenance below.
 First level maintenance: After every 50 hours
1 cup oil filter cleaning, unscrew the oil drain plug carburetor float chamber decentralization discharged sediment;
2, clean the spark plug, check the spark plug electrode gap, and adjusted if necessary;
3, check the valve clearance and adjust if necessary;
4, cleaning crankcase oil change.
Second Level maintenance: After every 100 hours of operation
1, A-level maintenance of all completed projects;
2, cleaning the tank, carburetor float chamber, clean or replace the air filter;
3 Remove the wind shield, remove the flywheel blades and head, the body heat sink fouling;
4, disassemble cylinder head, remove carbon deposits;
5, check the ignition timing and adjust if necessary.
Third Level maintenance: After every 200 hours of operation
1, the completion of all maintenance projects Class B;
2, cleaning the carburetor, using compressed air to blow through the oil channel and orifice;
3, check valve seal, if necessary, grinding the valve;
4, disassemble piston rod set, remove carbon pistons, piston rings on;
5, remove the muffler coke.
In addition, when the Honda generator has worked over 500 hours, please conduct a comprehensive technical inspection, where parts wear exceeds the limit, should be promptly repaired or replaced.
Hand disc Repair Guide: For manual start Honda generator, if used improperly, pull the rope can be easily damaged, thus we introduce the disc repair here.
In addition to that, after 500 hours operation, it is required to conduct a comprehensive inspection, when the parts wear exceeds the limit. It should be promptly repaired or replaced. Repair Guide: 1) For manually start the engine, if used improperly, pull the rope easily damaged boot disk and use, especially we want to talk about pulling the disc repair. The pull disk failure often appear in the spring, because when you start to pull back the line too much or too fast, it will result in winding fixed-ends lose-off the hook. Please use the a fitting screwdriver to remove the screws and pull the central disk, slowly remove the plastic tray, (but beware of the plate spring pop wounding). With needle-nose pliers to re-hook fixed-end. But if it is broken or no longer elastic spring, it will need to be replaced. It should be noted to a little grease reassembled on clockwork. 

友情链接: